Pedestal bearing ‒ SC type

RENK pedestal bearings in the SC range are optimized for stationary use as radial bearings in land applications and can also absorb moderate axial loads. They are primarily used in electrical machines.
The versions can be assembled from a modular system depending on the needs of the respective situation. The SC range of bearings was constructed in such as way that it can also be used together with the familiar E bearing range. The shaft heights and the drilling pattern of the foot mount, for example, match those of the E bearings to a large extent.
Frictional heat is dissipated by radiation and convection alone in many cases. Two lubricant coolers made of seawater resistant material can also be used in the housing, and integrated baffles boost the cooling performance.

Features

Pedestal bearing ‒ SC type

Bearing design tailored especially to industrial applications

Integration of special customer-specific requirements

Optimized design has been tried and tested in numerous applications

Noise and vibrations during operation are generally low

Noise and vibrations during operation are generally low

Overhaul and maintenance possible for installed shaft

Available as a package with numerous combination options

Technical data

Shaft diameter:
200 to 1,400 mm
Construction:
Pedestal bearing
Lubrication:
Self-lubricating (fixed oil ring, loose oil ring) or external lubrication
Cooling system:
Natural cooling, water cooling, or external cooling
Options:
Hydrostatic system, lubrication system, integrated electrical insulation

Other products

Thrust bearings ‒ AXILUS® LA type

RENK thrust bearings in the AXILUS® LA range are designed to absorb high axial forces and are used in shipbuilding to absorb the thrust of the propeller as well as in general mechanical engineering applications or in the field of electrical engineering to absorb large axial forces in horizontal machine shafts.

Go to product

Pedestal bearing ‒ HG type

RENK pedestal bearings in the HG range are self-lubricating slide bearings for high levels of radial and axial stress and were developed primarily for the mounting of hydro generators and electrical machines in stationary applications on land.

Go to product

Engine bearing ‒ SM type

RENK flange-mounted bearings in the SM series were specially developed for use as an engine bearing in naval applications. Designed for steeply inclined positions, the construction enables self-lubricating and therefore extremely quiet operation.

Go to product

Rolling mill bearing – WG type

RENK rolling mill bearings in the WG range are designed for extreme axial strain. They were developed primarily for the mounting of rolling mill drive units and large electrical machines in which high axial loads occur at low speeds and a high level of protection against damage must be ensured at extreme loads.

Go to product

Relevant industries

Industries

Shipping industry

Gear units, slide bearings, and couplings for the shipping industry. Make the most of reliable, low-emission drive technology from RENK.

Go to industry

Power generation

Power plant

Efficiency and reliability for your power plant

Go to industry

Industries

Mining

Couplings and conveyor systems for mining. Reliable drive components.

Go to industry

Industries

Steel and metal

Components for rollers, roller conveyors, or reel drives for the steel industry: we find the perfect solution for you.

Go to industry

Your contact person