Engine bearing ‒ SM type

RENK flange-mounted bearings in the SM series were specially developed for use as an engine bearing in naval applications. Designed for steeply inclined positions, the construction enables self-lubricating and therefore extremely quiet operation. Seawater resistant finned tube coolers integrated into the oil sump ensure optimal cooling performance.
Because the bearing shell is installed in the housing with a ball joint, the effort of aligning the bearing is reduced to a minimum and edge strain is prevented. Depending on the requirements, either hydrodynamic thrust surfaces or the tried-and-tested RENK RD slide shoes are integrated directly into the supporting body of the bearing shell to enable use as a fixed bearing.
A bearing housing made of gray cast iron is used in the standard version. When it comes to special applications, we offer decades of experience in developing customer-specific solutions with bearing housings in welded designs.

Features

Engine bearing ‒ SM type

Bearing design tailored especially to shipbuilding applications

Optimized design has been tried and tested in numerous applications

Self-lubricating operation despite highly inclined positions

Overhaul and maintenance possible for installed shaft

Noise and vibrations during operation are generally low

Efficient condition monitoring thanks to easy evaluation of the bearing temperature

Available as a package with numerous combination options

Technical data

Shaft diameter:
225 to 560 mm
Construction:
Flange-mounted bearing
Lubricant circulation:
Self-lubricating or external lubrication
Cooling system:
Natural cooling, water cooling, or external cooling
Options:
Hydrostatic system, lubricant circulation system, integrated electrical insulation

Downloads

Other products

Thrust bearings ‒ D type

RENK thrust bearings in the D range are suitable for absorbing high axial and radial forces, include shock type forces, regardless of the rotation and load direction.

Go to product

Pedestal bearing ‒ SC type

RENK pedestal bearings in the SC range are optimized for stationary use as radial bearings in land applications and can also absorb moderate axial loads. They are primarily used in electrical machines.

Go to product

Pedestal bearing ‒ HG type

RENK pedestal bearings in the HG range are self-lubricating slide bearings for high levels of radial and axial stress and were developed primarily for the mounting of hydro generators and electrical machines in stationary applications on land.

Go to product

Rolling mill bearing – WG type

RENK rolling mill bearings in the WG range are designed for extreme axial strain. They were developed primarily for the mounting of rolling mill drive units and large electrical machines in which high axial loads occur at low speeds and a high level of protection against damage must be ensured at extreme loads.

Go to product

Relevant industries

Industries

Shipping industry

Gear units, slide bearings, and couplings for the shipping industry. Make the most of reliable, low-emission drive technology from RENK.

Go to industry

Industries

Energy production

Turbo gear units, couplings, and slide bearings for the field of energy production. RENK drive technology guarantees high system availability at all times.

Go to industry

Your contact person